One of the complaints we’ve had with the 3M DI-NOC is that it only comes in a maximum width of 48 inces, or 4 feet. While it’s not possible to get wider material, there is a method called splicing which you can use to connect two pieces together while minimizing the seam in-between. In the below video we show you how best to use this method, as it’s very simple to do:\r\n\r\n
Measurement Conversion Chart For Our International Customers
We don’t all look at the same measurement formats, and we tend to get a lot of questions about what size if what in a different conversion. We went ahead and put together this measurement conversion chart which shows all of the sizes as well as what it is in sq/ft, feet, inches, yards, meters, and centimeters. We hope this helps! We’ve also added it to our FAQ where many other questions are also answered.
\r\n\r\n
Video: How To Wrap Your Light Switch Plates With 3M’s Carbon Fiber Vinyl
One of the first projects we did with 3M’s carbon fiber DI-NOC material was cover our light switch plates. It’s a simple part to wrap, it’s good practice, it doesn’t take very much material, and it looks amazing:\r\n\r\n
\r\n\r\nHere’s a couple pictures so you can see how it turned out:\r\n\r\n
What Makes 3M’s Carbon Fiber DI-NOC Film So Easy To Install?
The simple answer is 3M’s Comply adhesive. What exactly is this though and how does it make any difference compared to other vinyls out there? Take a look at the picture below:\r\n\r\n
\r\n\r\nThis picture is the back of the carbon fiber vinyl after you remove the paper…so it’s the sticky part. Regular adhesive has a flat/smooth backing, but as you can see, this actually has a grid of squares. All of those little squares allow air to easily escape through microreplicated channels under the surface of the film as it’s being applied. The result is a much easier installation with less chance of air bubbles. On top of that, you would install the vinyl using the dry method, which means there is no need to use soapy water to apply. If you mess up, you can simply pull it back off and re-stick it.\r\n\r\nThis is just one of the many reasons why the carbon fiber vinyl we carry here at Carbon Fiber Film is the best out there.
Carbon Fiber Vinyl Gets In The Game…Guitar Hero That Is
We just love when we get e-mails from our customers that have installed 3M’s carbon fiber DI-NOC vinyl on a unique item. This time around Rod took his Playstation 3 guitar for Guitar Hero, and wrapped it with the film:\r\n\r\n
What I like the most about the material is that is very forgiven and easy to use…. just apply some heat and your can do whatever you like. I used the rest of my material for small things like my credit card and office mouse. The quality of the vinyl is really superb and it looks really nice!\r\n\r\nWhen wrapping the guitar hero guitar with the vinyl, be sure to completely remove the faceplate for easier installation and better finishing.\r\n\r\nBehind the guitar there is a button to easily unlock and remove the faceplate.
\r\n
Subaru STI Interior Updated With Carbon Fiber Vinyl
One of our customers, David, used the 3M DI-NOC carbon fiber vinyl to wrap some of the accents inside the interior of his Subari STI. He wrapped the center console, the shift knob, and the air conditioning vents surround:\r\n\r\n
2010 Pricing Updates: Carbon Fiber Look For Less
For 2010 we’ve revamped our pricing structure across the board for 3M’s carbon fiber DI-NOC material. We’re still offering the best carbon fiber alternative on the market, but this time with even better prices for you! See the below chart to see the new pricing and how it compares to last years price:\r\n\r\n
\r\n\r\nAs you can see, we’re offering a ton of savings across the entire line, regardless of what size you’re looking to purchase. We understand there are other places out there to purchase material, we hope that you’ll buy from us because aside from competitive pricing we also provide excellent customer service and fast shipping. You can feel confident purchasing from us. We are a US-based company, and are an authorized reseller of 3M DI-NOC material.
Carbon Fiber Wrap In The Snow: 2006 Yamaha Nytro ER Snowmobile
While it probably wouldn’t be the first thing you would guess that DI-NOC would be installed on, one of our customers decided to put it on his 2006 Yamaha Nytro ER snowmobile.\r\n\r\n
DJ Gives His Technics 1200 MK2 Turntable The Carbon Fiber Look
One customer of ours put aside some extra 3M DI-NOC carbon fiber vinyl that he ordered from us, and decided to wrap his Technics 1200 MK2 turntable plinth.\r\n\r\n
The pictures simply do not do it justice, this stuff looks pretty amazing in person. I’ve been a huge carbon fiber fan since my import car days, and even have a carbon fiber toilet seat in my house…I was a little apprehensive about a carbon-look film but I’m very happy with how it turned out.
\r\n
Bentley Continental GT With 3M Carbon Fiber DI-NOC Interior Trim
JS Design Factory/ProMax Motorsports out of Alhambra, CA have recently completed installing our 3M carbon fiber DI-NOC vinyl on the interior trim of a Bentley Continental GT. While I would start to consider using real carbon fiber, especially on a $100k+ vehicle, sometimes that’s just not realistic. That’s when 3M’s DI-NOC offers a great alternative.\r\n\r\n
